DWNSHFT

Guide de préparation

Toyota Celica GT-Four (ST165)

Moteur: 3S-GTE gen 1 (CT26)

The first turbo AWD Celica and an early Group A rally car. The gen 1 3S-GTE is tough, and these cars are mostly built as rally-inspired road cars or restored classics. Many parts interchange with the later ST185.

Ce guide est en anglais pour l’instant.

Toyota Celica GT-Four (ST165)

Photo : Charles from Port Chester, New York · CC BY 2.0 · Wikimedia Commons

  1. Étape 0 · BaseStock (~185 PS)Rust, timing service, driveline fluids.~$2,000–5,000 CAD
  2. Étape 1 · Rue~200–230 whpExhaust, boost control, fuel cut handling.~$1,500–3,500 CAD
  3. Étape 2 · Sportive / Piste~260–320 whpFMIC, fuel, ECU, hybrid turbo.~$5,000–10,000 CAD
  4. Étape 3 · Préparation complète350+ whpGen 3 3S-GTE swap or built engine.~$12,000–25,000 CAD

À vérifier avant de modifier

  • Age-related rust, especially rear arches and sills.
  • Centre diff, viscous coupling and transfer case wear.
  • Vacuum lines, fuel cut and tired turbo.
0

Base

Rust, timing service, driveline fluids.

Puissance (estimation)
Stock (~185 PS)
Budget pièces
~$2,000–5,000 CAD

Moteur

  • Timing belt and water pumpAisinToyota OEM

Transmission

  • Gearbox, transfer and diff fluidsMotulRedline

Aéro et extérieur

  • Rust repair and cavity protectionKrownFluid Film

Ordre des travaux

  1. Rust first, then timing service, then driveline fluids.
1

Rue

Exhaust, boost control, fuel cut handling.

Puissance (estimation)
~200–230 whp
Budget pièces
~$1,500–3,500 CAD

Admission et échappement

  • 3-inch downpipe and exhaustHKScustom

Électronique et calibration

  • Boost controller + fuel cut defenderHKSBlitz

Suspension

  • Dampers and bushingsKYBBilsteinSuperPro

Freins

  • Performance pads and DOT 4 fluidHawkProject MuMotul

Roues et pneus

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Ordre des travaux

  1. Exhaust, then boost control; wideband gauge.
2

Sportive / Piste

FMIC, fuel, ECU, hybrid turbo.

Puissance (estimation)
~260–320 whp
Budget pièces
~$5,000–10,000 CAD

Refroidissement

  • FMICcustomMishimoto

Suralimentation

  • CT26 hybrid or GT28 conversionGarretthybrid specialists

Électronique et calibration

  • Standalone ECULinkHaltech

Alimentation

  • Injectors and pumpInjector DynamicsWalbro

Transmission

  • Uprated clutchExedyCompetition Clutch

Ordre des travaux

  1. ECU and fuel first, then turbo and intercooler.
3

Préparation complète

Gen 3 3S-GTE swap or built engine.

Puissance (estimation)
350+ whp
Budget pièces
~$12,000–25,000 CAD

Moteur

  • Gen 3 3S-GTE swap or forged internalsCPManleyARP

Intérieur

  • Cage, seats, harnessesSparcoOMP

Ordre des travaux

  1. Engine and driveline together; safety gear for rally or track use.

Les chiffres de puissance et de budget sont des estimations (pièces seulement, en $ CA), pas des garanties : le carburant, la calibration, le climat et le choix des pièces changent tout. Les marques sont des exemples, pas des commandites. Retirer ou vider les catalyseurs, ou désactiver les systèmes antipollution, est illégal sur les voitures de route au Canada et aux États-Unis; les pièces marquées « hors route / piste seulement » sont réservées aux véhicules de compétition.

Sources