DWNSHFT

Build guide

Toyota Celica GT-Four (ST165)

Engine: 3S-GTE gen 1 (CT26)

The first turbo AWD Celica and an early Group A rally car. The gen 1 3S-GTE is tough, and these cars are mostly built as rally-inspired road cars or restored classics. Many parts interchange with the later ST185.

Toyota Celica GT-Four (ST165)

Photo: Charles from Port Chester, New York · CC BY 2.0 · Wikimedia Commons

  1. Stage 0 · BaselineStock (~185 PS)Rust, timing service, driveline fluids.~$2,000–5,000 CAD
  2. Stage 1 · Street~200–230 whpExhaust, boost control, fuel cut handling.~$1,500–3,500 CAD
  3. Stage 2 · Spirited / Track~260–320 whpFMIC, fuel, ECU, hybrid turbo.~$5,000–10,000 CAD
  4. Stage 3 · Full build350+ whpGen 3 3S-GTE swap or built engine.~$12,000–25,000 CAD

Check before modifying

  • Age-related rust, especially rear arches and sills.
  • Centre diff, viscous coupling and transfer case wear.
  • Vacuum lines, fuel cut and tired turbo.
0

Baseline

Rust, timing service, driveline fluids.

Power (estimate)
Stock (~185 PS)
Parts budget
~$2,000–5,000 CAD

Engine

  • Timing belt and water pumpAisinToyota OEM

Drivetrain

  • Gearbox, transfer and diff fluidsMotulRedline

Aero & exterior

  • Rust repair and cavity protectionKrownFluid Film

Order of work

  1. Rust first, then timing service, then driveline fluids.
1

Street

Exhaust, boost control, fuel cut handling.

Power (estimate)
~200–230 whp
Parts budget
~$1,500–3,500 CAD

Intake & exhaust

  • 3-inch downpipe and exhaustHKScustom

Electronics & tuning

  • Boost controller + fuel cut defenderHKSBlitz

Suspension

  • Dampers and bushingsKYBBilsteinSuperPro

Brakes

  • Performance pads and DOT 4 fluidHawkProject MuMotul

Wheels & tires

  • Quality 200TW performance tiresYokohamaBridgestoneFalken

Order of work

  1. Exhaust, then boost control; wideband gauge.
2

Spirited / Track

FMIC, fuel, ECU, hybrid turbo.

Power (estimate)
~260–320 whp
Parts budget
~$5,000–10,000 CAD

Cooling

  • FMICcustomMishimoto

Forced induction

  • CT26 hybrid or GT28 conversionGarretthybrid specialists

Electronics & tuning

  • Standalone ECULinkHaltech

Fuel

  • Injectors and pumpInjector DynamicsWalbro

Drivetrain

  • Uprated clutchExedyCompetition Clutch

Order of work

  1. ECU and fuel first, then turbo and intercooler.
3

Full build

Gen 3 3S-GTE swap or built engine.

Power (estimate)
350+ whp
Parts budget
~$12,000–25,000 CAD

Engine

  • Gen 3 3S-GTE swap or forged internalsCPManleyARP

Interior

  • Cage, seats, harnessesSparcoOMP

Order of work

  1. Engine and driveline together; safety gear for rally or track use.

Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.

Sources