Build guide
Mazda MX-5 Miata / Roadster (NA)
Engine: B6-ZE 1.6 / BP-ZE 1.8
The original lightweight roadster. Handling and driver feel are the point, so builds start with a roll bar, suspension and tires. Turbo kits and swaps are well documented for more power.

Photo: Ethan Llamas · CC BY-SA 4.0 · Wikimedia Commons
- Stage 0 · BaselineStock (~120–130 PS)Rust, timing belt, cooling, bushings.~$1,500–4,000 CAD
- Stage 1 · Street~+5 hpSuspension, tires, brakes; roll bar.~$2,500–5,500 CAD
- Stage 2 · Spirited / Track~120–140 whpStandalone ECU, intake/exhaust, LSD.~$3,500–7,500 CAD
- Stage 3 · Full build~200–300 whpTurbo kit, or a swap (BP/K-series/V8).~$8,000–20,000 CAD
Check before modifying
- Early 1.6 engines (1989–early 1991) have the "short-nose" crank, which can wobble the crank pulley; check before any power mods.
- Rust (rocker panels, rear arches, front frame rails in salt-belt cars).
- Soft-top drain holes clog and rot the sills.
- No factory roll-over protection; a roll bar is a must for track use.
Trim differences
- The 1.8 (BP-ZE) has more torque and often a Torsen LSD; the 1.6 is lighter and revs more freely.
Baseline
Rust, timing belt, cooling, bushings.
- Power (estimate)
- Stock (~120–130 PS)
- Parts budget
- ~$1,500–4,000 CAD
Engine
- Timing belt, water pump, cam/crank sealsGatesAisinMazda OEM
Cooling
- Aluminium radiator and hosesKoyoMishimoto
Suspension
- Bushings and dampersMazda OEMEnergy SuspensionBilstein
Aero & exterior
- Rust repair and drain clearingKrownFluid Film
Order of work
- Inspect the crank nose (1.6) and rust first.
- Timing belt and cooling, then bushings and alignment.
Street
Suspension, tires, brakes; roll bar.
- Power (estimate)
- ~+5 hp
- Parts budget
- ~$2,500–5,500 CAD
Suspension
- Coilovers or shocks/springsFlyin' MiataFat CatBilsteinBC Racing
Interior
- Roll barHard DogBlackbird FabworxBoss Frog
Brakes
- Pads, lines, fluidHawkCarbotechMotul
Wheels & tires
- Light 15-inch wheels and 200TW tiresEnkei949 RacingYokohama
Order of work
- Roll bar and suspension first; then brakes and tires.
Spirited / Track
Standalone ECU, intake/exhaust, LSD.
- Power (estimate)
- ~120–140 whp
- Parts budget
- ~$3,500–7,500 CAD
Electronics & tuning
- Standalone ECUMegasquirtLinkHaltech
Intake & exhaust
- Header and exhaustRacing BeatJackson Racing
Drivetrain
- LSD (Torsen swap or clutch type)Mazda OEMOS GikenKaaz
Order of work
- LSD and ECU, then intake and exhaust.
Full build
Turbo kit, or a swap (BP/K-series/V8).
- Power (estimate)
- ~200–300 whp
- Parts budget
- ~$8,000–20,000 CAD
Forced induction
- Turbo kitFlyin' MiataBEGi
Drivetrain
- Clutch and gearbox upgradeExedyFlyin' Miata
Engine
- Built engine or swapFlyin' Miatavarious
Order of work
- Drivetrain and cooling with the turbo; build the engine for 250+ whp.
Power and budget figures are estimates (parts only, in CAD) for guidance, not guarantees: fuel, tune, climate and parts choices change everything. Brand names are examples, not endorsements or sponsorships. Removing or gutting catalytic converters, or disabling emissions systems, is illegal on road cars in Canada and the US; parts marked "off-road / track only" are for competition vehicles.