DWNSHFT

Subaru Impreza GC8

GC8 (1st gen) · 1992–2000

Engine
EJ20
Power
276 hp
Curb weight
1,250 kg
Bolt pattern (PCD)
5x100
Subaru Impreza GC8

Photo: Tokumeigakarinoaoshima · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Subaru Impreza GC8 was built from 1992–2000. Engines: EJ20. Factory output is 276 hp (Japanese-market figures). Wheels bolt on with a 5x100 pattern, 56.1 mm hub bore and M12x1.25 lug thread.

History

The first-generation Impreza launched in 1992, and the WRX quickly became Subaru's rally weapon. STI versions with the EJ20 turbo flat-four, closer ratios and stiffer suspension arrived from 1994, alongside a run of World Rally Championship success, including three straight manufacturers' titles from 1995 to 1997.

North America never got a turbo GC8 from the factory, only the 2.5RS, so imported JDM cars and STI conversions became a scene of their own. The "blue and gold" rally look is still one of the most recognizable liveries in motorsport.

Build guide

Subaru Impreza WRX STI (GC8)

EJ20 / EJ207 turbo (by version)

The rally-era STI: light, AWD, with a boost-friendly but knock-sensitive EJ20. Tuning quality decides engine life. Rust and transmission wear are the main buying risks in Canada.

  1. Stage 0 · BaselineStock (~275–280 PS)Compression and leak-down, timing belt, oil system.~$2,000–5,000 CAD
  2. Stage 1 · Street~240–270 whpExhaust, intake, conservative tune; chassis basics.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~320–380 whpTurbo, fuel, intercooler and gearbox protection.~$7,000–14,000 CAD
  4. Stage 3 · Full build400–500+ whpBuilt EJ and 6MT drivetrain.~$15,000–35,000 CAD
Check before modifying (4)
  • EJ knock sensitivity; ringland and rod-bearing failures follow lean or aggressive tunes. Log knock on every map.
  • Oil pickup O-ring and oil starvation in long corners; low oil level kills EJs.
  • Rust (rear arches, sills, strut tops) and accident or rally history.
  • 5MT synchros and centre diff wear; early versions have weaker gearboxes.
Read the full Subaru Impreza WRX STI (GC8) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Subaru Impreza GC8, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work16×7 +48205/50R1616×7 +48205/50R16Bolts on (lowered on good springs or coilovers)
FlushSits at the fender17×8 +48225/45R1717×8 +48225/45R17Fender roll
AggressivePoke and stance17×9 +35245/40R1717×9 +35245/40R17Fender roll, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Subaru EJ20 / EJ207

Turbo

An upgraded turbo and a conservative tune; build the bottom end before big power.

  1. Stage 1 · Bolt-ons300–330 hp
    • Boost controller
    • Intake
    • Downpipe
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Upgraded turbo
    • Fuel pump
    • Injectors
    • Intercooler upgrade
  3. Stage 3 · Big power450+ hp
    • Built bottom end
    • Head studs
    • Standalone ECU
    • E85 / flex fuel

Known weak points

  • Ringland failure from detonation; tune carefully and watch knock.
  • Rod bearings and oil starvation under hard track use.
More about the Subaru EJ20 / EJ207 →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
WRX STIGC8EJ20AWD276 hp5x1001994–2000

Stock spec sheet

GC8 WRX STIGC8

Japan (JDM)1996–2000

Engine & drivetrain

Engine
EJ20
Displacement
1,994 cc (2 L)
Aspiration
Turbo
Bore × stroke
92 × 75 mm
Compression
8:1
Transmission
5MT
Drivetrain
All-wheel drive (AWD)
Differential
Viscous centre

Stock performance

Power
276 hp (206 kW) @ 6,500 rpm
Torque
353 N·m (260 lb-ft) @ 4,000 rpm
Curb weight
1,250 kg (2,756 lb)
Weight per hp
4.5 kg/hp (10 lb/hp)
Fuel tank
50 L (13.2 US gal)

Factory wheels & tires

Wheels
16x7
Tires
205/50R16
Tire diameter
611 mm (24.1 in)
Bolt pattern (PCD)
5x100
Center bore
56.1 mm
Lug thread
M12x1.25

Dimensions

Length
4,350 mm (171.3 in)
Width
1,690 mm (66.5 in)
Height
1,405 mm (55.3 in)
Wheelbase
2,520 mm (99.2 in)

Versions III–VI; earlier STIs made 250–275 PS.

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Subaru Impreza GC8 have?

The Subaru Impreza GC8 came with the EJ20.

How much horsepower does the Subaru Impreza GC8 have?

The Subaru Impreza GC8 makes 276 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Subaru Impreza GC8?

The Subaru Impreza GC8 uses a 5x100 bolt pattern with a 56.1 mm hub bore and M12x1.25 lug thread.

What size wheels fit the Subaru Impreza GC8 without rolling the fenders?

About 16x7 +48 (205/50R16) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Subaru Impreza GC8?

Popular swaps include EJ207 / EJ257.

What are the common problems with the Subaru EJ20 / EJ207?

Ringland failure from detonation; tune carefully and watch knock. Rod bearings and oil starvation under hard track use.

Where should I start building a Subaru Impreza GC8?

Compression and leak-down, timing belt, oil system. Compression and leak-down test before buying or tuning. Timing belt, oil pickup, fluids; fit oil pressure and AFR gauges.

How much power can a Subaru Impreza GC8 make, and what does it cost?

A full build (Built EJ and 6MT drivetrain) typically makes 400–500+ whp, for roughly 15,000–35,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Subaru Impreza GC8

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.