DWNSHFT

Mazda RX-8 SE3P

2003–2012

Engine
13B-MSP
Power
247 hp
Curb weight
1,310 kg
Bolt pattern (PCD)
5x114.3
Mazda RX-8 SE3P

Photo: VKras · CC BY-SA 4.0 · Wikimedia Commons

Key facts

The Mazda RX-8 SE3P was built from 2003–2012. Engines: 13B-MSP. Factory output is 247 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 67.1 mm hub bore and M12x1.5 lug thread.

Build guide

Mazda RX-8 Type S (SE3P)

13B-MSP Renesis

A balanced FR chassis with a high-revving rotary. Engine health is everything, so ignition, cooling and compression come first. Power mods are modest unless forced induction or a swap is added.

  1. Stage 0 · BaselineStock (~250 PS)Compression test, coils, plugs, cooling.~$1,500–4,000 CAD
  2. Stage 1 · Street~+5–10 hpSuspension, exhaust.~$2,000–5,000 CAD
  3. Stage 2 · Spirited / Track~+10–15 hpTune, header.~$2,500–5,000 CAD
  4. Stage 3 · Full build300+ whpForced induction or engine swap.~$10,000–25,000 CAD
Check before modifying (4)
  • Low compression and seal wear.
  • Ignition coils and plugs; flooding on cold starts.
  • Oil consumption by design; check level often.
  • Catalytic converter blockage from oil burning.
Read the full Mazda RX-8 Type S (SE3P) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Mazda RX-8 SE3P, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work18×8.5 +45235/40R1818×8.5 +45235/40R18Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9.5 +40245/40R1818×9.5 +40245/40R18Fender roll
AggressivePoke and stance18×10 +30265/35R1818×10 +30265/35R18Fender roll, Fender pull, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Mazda RENESIS (13B-MSP)

Naturally aspirated

Keep it healthy first (coils, cooling, oil metering); turbo kits come second.

  1. Stage 1 · Bolt-ons+10–15 hp
    • Intake
    • Exhaust
    • ECU tune
  2. Stage 2 · Supporting mods+80–120 hp
    • Turbo kit
    • Supercharger kit
    • Fuel system
  3. Stage 3 · Big power+150+ hp
    • Standalone ECU
    • Porting
    • Cooling upgrade

Known weak points

  • Low compression from flooding or short trips; many engines get rebuilt.
  • Ignition coils and plugs wear fast; misfires can clog the catalytic converter.
More about the Mazda RENESIS (13B-MSP) →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
Type SSE3P13B-MSPFR247 hp5x114.32003–2012

Stock spec sheet

SE3P Type SSE3P

Japan (JDM)2003–2008

Engine & drivetrain

Engine
13B-MSP
Displacement
1,308 cc (1.3 L)
Aspiration
Naturally aspirated
Compression
10:1
Transmission
6MT
Drivetrain
Front-engine, RWD (FR)

Stock performance

Power
247 hp (184 kW) @ 8,500 rpm
Torque
216 N·m (159 lb-ft) @ 5,500 rpm
Curb weight
1,310 kg (2,888 lb)
Weight per hp
5.3 kg/hp (11.7 lb/hp)
Fuel tank
61 L (16.1 US gal)

Factory wheels & tires

Wheels
18x8 ET50
Tires
225/45R18
Tire diameter
660 mm (26 in)
Bolt pattern (PCD)
5x114.3
Center bore
67.1 mm
Lug thread
M12x1.5

Dimensions

Length
4,435 mm (174.6 in)
Width
1,770 mm (69.7 in)
Height
1,340 mm (52.8 in)
Wheelbase
2,700 mm (106.3 in)

RENESIS two-rotor, 2 × 654 cc.

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Mazda RX-8 SE3P have?

The Mazda RX-8 SE3P came with the 13B-MSP.

How much horsepower does the Mazda RX-8 SE3P have?

The Mazda RX-8 SE3P makes 247 hp from the factory (Japanese-market figures).

What is the bolt pattern of the Mazda RX-8 SE3P?

The Mazda RX-8 SE3P uses a 5x114.3 bolt pattern with a 67.1 mm hub bore and M12x1.5 lug thread.

What size wheels fit the Mazda RX-8 SE3P without rolling the fenders?

About 18x8.5 +45 (235/40R18) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Mazda RX-8 SE3P?

Popular swaps include 13B-REW, GM LS (V8).

What are the common problems with the Mazda RENESIS (13B-MSP)?

Low compression from flooding or short trips; many engines get rebuilt. Ignition coils and plugs wear fast; misfires can clog the catalytic converter.

Where should I start building a Mazda RX-8 SE3P?

Compression test, coils, plugs, cooling. Compression test, then coils and plugs, then cooling.

How much power can a Mazda RX-8 SE3P make, and what does it cost?

A full build (Forced induction or engine swap) typically makes 300+ whp, for roughly 10,000–25,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Mazda RX-8 SE3P

No specialist shop for the Mazda RX-8 SE3P in our list yet. The Japanese-car shops in the store directory carry parts for it.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.