DWNSHFT

Mazda RX-7 FD

FD (3rd gen) · 1991–2002

Engine
13B-REW
Power
252–276 hp
Curb weight
1,260–1,280 kg
Bolt pattern (PCD)
5x114.3
Mazda RX-7 FD

Photo: Mr.choppers · CC BY-SA 3.0 · Wikimedia Commons

Key facts

The Mazda RX-7 FD was built from 1991–2002. Engines: 13B-REW. Factory output ranges from 252 to 276 hp (Japanese-market figures). Wheels bolt on with a 5x114.3 pattern, 67.1 mm hub bore and M12x1.5 lug thread.

History

The third-generation RX-7 launched in late 1991 with flowing, timeless styling and the 13B-REW twin-rotor engine using sequential twin turbos. Low weight, a low center of gravity and near-perfect balance made it one of the best-handling cars of its decade.

North America only received it for a few model years in the mid-1990s, but Japan kept refining it until the final Spirit R editions in 2002. The rotary demands careful maintenance and cooling, and owners pursue single-turbo conversions, rotary-specific tuning and sometimes engine swaps.

Build guide

Mazda RX-7 (FD3S)

13B-REW sequential twin turbo

One of the best-handling cars of its era, with a sequential twin-turbo rotary. Cooling and vacuum reliability come first; power comes after.

  1. Stage 0 · BaselineStock (~255–280 PS)Cooling, vacuum lines, compression test.~$3,000–8,000 CAD
  2. Stage 1 · Street~250–300 whpIntake, exhaust, ECU.~$3,000–6,000 CAD
  3. Stage 2 · Spirited / Track~300–350 whpFMIC, fuel, cooling.~$6,000–12,000 CAD
  4. Stage 3 · Full build400+ whpSingle turbo, rebuilt engine.~$15,000–35,000 CAD
Check before modifying (4)
  • Overheating; tired cooling system.
  • Vacuum "rat's nest" complexity.
  • Seal wear with boost; compression test before any mods.
  • Pre-silencer and catalytic converter overheating; heat management matters.
Read the full Mazda RX-7 (FD3S) build guide →

Wheel fitment guide

Wheel and tire sizes that fit the Mazda RX-7 FD, from the largest setup that needs no fender work to an aggressive stance.

Wheel fitment guide
SetupFrontRearWhat it takes
SafeMax fitment, no fender work17×9 +45255/40R1717×9 +45255/40R17Bolts on (lowered on good springs or coilovers)
FlushSits at the fender18×9.5 +35245/40R1818×10 +35265/35R18Fender roll
AggressivePoke and stance18×9.5 +22265/35R1818×10.5 +22285/30R18Fender roll, Fender pull, Negative camber, Coilovers

Community-consensus starting points. Ride height, camber, tire brand and fender condition all change what fits: test-fit before you buy.

Performance upgrades

The usual path for this car’s engines, from bolt-ons to big power, and what tends to break first.

Mazda 13B-REW rotary

Turbo

A single-turbo conversion, standalone ECU and serious cooling for 400+ hp.

  1. Stage 1 · Bolt-ons280–320 hp
    • Downpipe
    • Intake
    • Exhaust
    • Cooling upgrade
    • ECU tune
  2. Stage 2 · Supporting mods350–400 hp
    • Single-turbo conversion
    • Front-mount intercooler
    • Fuel system
    • Standalone ECU
  3. Stage 3 · Big power450–600 hp
    • Porting
    • Apex seals
    • E85 / flex fuel

Known weak points

  • Heat: radiators, vacuum hoses and sequential turbo solenoids age; many simplify the system.
  • Apex seals die from detonation or overheating; watch fuelling and coolant.
More about the Mazda 13B-REW rotary →

Popular engine swaps

Trims

TrimChassis codeEngineDrivetrainPowerBolt pattern (PCD)Years
Type RFD3S13B-REWFR276 hp5x114.31991–2002

Stock spec sheet

FD Type RFD3S

Japan (JDM)1991–1995

Engine & drivetrain

Engine
13B-REW
Displacement
1,308 cc (1.3 L)
Aspiration
Twin-turbo
Compression
9:1
Transmission
5MT
Drivetrain
Front-engine, RWD (FR)
Differential
Torsen rear

Stock performance

Power
252 hp (188 kW) @ 6,500 rpm
Torque
294 N·m (217 lb-ft) @ 5,000 rpm
Curb weight
1,260 kg (2,778 lb)
Weight per hp
5 kg/hp (11 lb/hp)
Fuel tank
76 L (20.1 US gal)

Factory wheels & tires

Wheels
16x8 ET50
Tires
225/50R16
Tire diameter
631 mm (24.9 in)
Bolt pattern (PCD)
5x114.3
Center bore
67.1 mm
Lug thread
M12x1.5

Dimensions

Length
4,295 mm (169.1 in)
Width
1,760 mm (69.3 in)
Height
1,230 mm (48.4 in)
Wheelbase
2,425 mm (95.5 in)

Sequential twin turbos.

Source: DWNSHFT compiled from Japanese-market manufacturer data

Frequently asked questions

What engine does the Mazda RX-7 FD have?

The Mazda RX-7 FD came with the 13B-REW.

How much horsepower does the Mazda RX-7 FD have?

The Mazda RX-7 FD makes between 252 and 276 hp from the factory, depending on trim and year (Japanese-market figures).

What is the bolt pattern of the Mazda RX-7 FD?

The Mazda RX-7 FD uses a 5x114.3 bolt pattern with a 67.1 mm hub bore and M12x1.5 lug thread.

What size wheels fit the Mazda RX-7 FD without rolling the fenders?

About 17x9 +45 (255/40R17) on all four corners fits without fender work on a typically lowered car. Bigger setups need a fender roll or more.

What are popular engine swaps for the Mazda RX-7 FD?

Popular swaps include 20B (three-rotor), GM LS (V8), 2JZ-GTE.

What are the common problems with the Mazda 13B-REW rotary?

Heat: radiators, vacuum hoses and sequential turbo solenoids age; many simplify the system. Apex seals die from detonation or overheating; watch fuelling and coolant.

Where should I start building a Mazda RX-7 FD?

Cooling, vacuum lines, compression test. Compression test, then cooling and vacuum lines.

How much power can a Mazda RX-7 FD make, and what does it cost?

A full build (Single turbo, rebuilt engine) typically makes 400+ whp, for roughly 15,000–35,000 CAD in parts. These are estimates; fuel, tune and parts choices change the result.

Shops for the Mazda RX-7 FD

Specialists who build their business around this car: deep catalogs, and people who know its quirks.

Prices, stock and shipping are on each store's site. DWNSHFT doesn't get paid for these links.